I am having difficulty getting prerequisites loaded on a raspberry pi 4.
I've fixed this problem before but I cant seem to remember how I did it!
Help please.
As an update for you all, I gave up on the Behringer UCA202s and its
inherent mono problem have substituted a HifiBerry DAC+ ADC Pro for the
input to the transmitter side, and a DAC+ Pro XLR for the output at the
receiver side.
Thanks
pi@OpenOB-TX:~ $ sudo apt-get install python-gst0.10 python-setuptools
gstreamer0.10-plugins-base gstreamer0.10-plugins-bad
gstreamer0.10-plugins-good gstreamer0.10-plugins-ugly gstreamer0.10-ffmpeg
gstreamer0.10-tools python-gobject python-gobject-2 gstreamer0.10-alsa
python-argparse
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package python-gst0.10 is not available, but is referred to by another
package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
Package gstreamer0.10-plugins-good is not available, but is referred to by
another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
Package gstreamer0.10-plugins-bad is not available, but is referred to by
another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
gstreamer0.10-plugins-base
Package gstreamer0.10-plugins-ugly is not available, but is referred to by
another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
Package gstreamer0.10-ffmpeg is not available, but is referred to by another
package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'python-gst0.10' has no installation candidate
E: Package 'gstreamer0.10-plugins-bad' has no installation candidate
E: Package 'gstreamer0.10-plugins-good' has no installation candidate
E: Package 'gstreamer0.10-plugins-ugly' has no installation candidate
E: Package 'gstreamer0.10-ffmpeg' has no installation candidate
pi@OpenOB-TX:~ $
Hi
Update FYI.
Yesterday had the Zeroteir connected system running all day, heard no
drop-outs with the streaming!.
Both ends of RasPi4's OpenOB's and Zeroteir have, start at boot scripts,
today I powered system up again ( in no particular order) the 4G router,
it's streaming RasPi4 OpenOB, the receiver RasPi4 OpenOB, all OB and
Zerotier systems auto connected and started streaming. Looks good.
Regards Evan
-------------
Hi all
I'm working with a community radio station and looking for suggestions
on how best to receive the OpenOB streams from (4) remote studios to
the hub studio (single fixed IP).
The remote studios have RasPi4 OpenOB senders, the hub end will be (4)
RasPi4 OpenOB receivers, audio from each receiver will be selectable, as
required, for re-broadcast on the main FM Station. The audio switching
at the hub end all figured out and tested.
All remote studios have broadband service (Satellite and no fixed IP), I
have a single test site that has been streaming for the past couple of
months and works fine.
However I have not resolved how best to now get the (4) OpenOB remote
studios, sending to the single fixed IP at the hub end and received on
their respective RasPi OpenOB receivers.
After experiencing one hack on the test stream's exposed redis server
(not surprised), It is now obvious I will now need to secure all the
streams on a working system. I have looked at a couple of options, such
as a local OpenVPN server, OpenVPN with IPvanish server, spiped or
Zerotier (as suggested by Klaus),.
With many options, I am looking for guidance at this point on best way
to go. Any help, comments or suggestions would be most welcome.
Regards..Evan
============
Hi all
I'm working with a community radio station and looking for suggestions
on how best to receive the OpenOB streams from (4) remote studios to
the hub studio (single fixed IP).
The remote studios have RasPi4 OpenOB senders, the hub end will be (4)
RasPi4 OpenOB receivers, audio from each receiver will be selectable, as
required, for re-broadcast on the main FM Station. The audio switching
at the hub end all figured out and tested.
All remote studios have broadband service (Satellite and no fixed IP), I
have a single test site that has been streaming for the past couple of
months and works fine.
However I have not resolved how best to now get the (4) OpenOB remote
studios, sending to the single fixed IP at the hub end and received on
their respective RasPi OpenOB receivers.
After experiencing one hack on the test stream's exposed redis server
(not surprised), It is now obvious I will now need to secure all the
streams on a working system. I have looked at a couple of options, such
as a local OpenVPN server, OpenVPN with IPvanish server, spiped or
Zerotier (as suggested by Klaus),.
With many options, I am looking for guidance at this point on best way
to go. Any help, comments or suggestions would be most welcome.
Regards..Evan
============