[openob-users] Re: Raspbian Stretch?

Hi Drew, There are a few dependencies that have moved on in terms of version numbers, but it does work. I managed to get it all working on stretch and documented the process some time back when I was tinkering with openob-gui, looking at my notes: sudo apt-get install python-gst-1.0 gstreamer1.0-alsa libgstreamer1.0-0 gstreamer1.0-libav gstreamer1.0-doc gstreamer1.0-tools sudo apt-get install gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly sudo apt-get install python3-pip pip3 install openob Should get you through it. If you get stuck anywhere, I would appreciate the feedback and I will update my notes. Regards, James Sent from my Huawei phone -------- Original Message -------- Subject: [openob-users] Raspbian Stretch? From: drew Roberts <zotzbro(a)gmail.com> To: For users of the OpenOB project <openob-users(a)lists.talkunafraid.co.uk CC: OK, does anyone have openob running on raspbian stretch? Any gotchas? I am having issues. I would be quite happy setting up 2 Pis with openob on a lan as a first cut. Do I need to ditch stretch and go back to jessie on these machines or can we get openob running fine on stretch? I don't really want to be doing this. We had a nice setup all tested out. A Nook next to a rivendell server. The Nook running ubuntu and openob. The remote and had a pi running openob and a "hat?" soundcard. (Can't put my hands on the link to it now.) A little mixer, a mic, a laptop. The remote person could connect to the "studio", control the nook and rdairplay and run a whole remote show from the field without a boardop in studio. openvpn between the pi and the nook with openob over the vpn link. We haven't used it in forever. Now have a need again and openvpn and openob seem to be missing from the remote pi. (Plus the Nook seems to be rebooting about every 10 minutes for some reason we have not been able to track down yet. Ouch. So, I am trying to get the pi end working again (with a new pi at first) and then work on the nook (or a replacement) end... I know this is a bit long winded, but the actual setup was quite sweet and I thought it might inspire someone. -- Enjoy the *Paradise Island Cam* playing *Bahamian Or Nuttin* - https://www.paradiseislandcam.com/